Rear Wiper Motor Removal; Rear Wiper Motor Inspection; Rear Wiper Motor Installation - Hyundai trajet Shop Manual

REAR WIPERIWASHER
REAR WIPER MOTOR
REMOVAL
ETHA2650
1. Remove the tailgate frame upper and side trim.
BE -59
[RD7]
EBItJjj
1. Battery(+)
2. Parking
INSTALLATION
ETHA2800
3. Switch
4. Earth
KTDA170A
ETHA265A
1. Install the rear wiper arm to the specified stop
position.
2. Remove the tailgate trim panel.
ESHA010C
3. Remove the rear wiper motor.
Specified position
Distance
A
60mm
\\;
==""
ETHA070C
ESHA010J
4. Installation is the reverse of the removal process.
INSPECTION
ETHA2700
1. Remove the connector from the rear wiper motor.
2. Connect positive(+) and negative(-) battery cables
to terminals 1 and 4 respectively.
3. Check that the motor operates normally, and replace
the motor if it operates abnormally.
2. Set the washer nozzle on the specified spray posi-
tion.
ETHA070D