Table of Contents
Advertisement
EXTERIOR
BODY SIDE MOLDINGS
REMOVAL AND INSTALLATION
ESHA0550
WAISTLINE MOLDING
Beginning from either end, remove the waistline molding
using the special tool (09800-21000) from the front and
rear doors.
CAUTION
Take care not to scratch or bend the door moldings.
ESHA025C
ROOF SIDE GARNISH
ESHA0600
1.
Remove the roof side garnish by using a flat bladed
screwd rive r.
CAUTION
When prying with a flat bladed screwdriver, wrap
it
with protective tape to prevent damage.
In order not to scratch the body and roof side
garnish, use protective tape on the body.
2.
Pull the roof side garnish up, then remove the roof
side garnish.
3.
Installation is the reverse of the removal process.
NOTE
If necessary, replace any damaged clips.
ESHA025B
BD -17
Advertisement
Table of Contents
Troubleshooting
