Hyundai trajet Shop Manual page 21

SO -20
3. Remove the sun shade.
ESA9011E
4. Remove the guide assembly.
ESA9011F
5. Remove the deflector.
ESA9011G
6. Remove the motor assembly.
When removing the motor, the slider assembly
should always be in a fully closed position. If there
is discrepancy between the glass position and the
motor ring in a fully closed position, the sunroof
will not operate correctly.
BODY (INTERIOR & EXTERIOR)
ESA9060N
INSTALLATION
ESHA0850
Installation is the reverse of the removal process.
NOTE
Check that the limit switches (LSi and LS2) of the
motor are the fully closed. Align the guide roller
center and slider mating mark in the fully closed
position.
LS1
ESA9070D
ESA9011H