Flasher Unit Inspection - Hyundai trajet Shop Manual

TURN/HAZARD LAMPS
FLASHER UNIT
INSPECTION
ETHA3150
1. Remove the flasher unit from the relay box.
2. Connect the positive (+) lead from the battery to
terminal 2 and the negative (-) lead to terminal 3.
BE -73
KTDA212A
3. Connect the two turn signal lamps parallel to each
other to terminals 2 and 3. Check that the bulbs turn
on and off.
NOTE
The turn signal lamps should flash 60 to 120 times
per minute. If one of the front or rear turn signal
lamps has an open circuit, the number of flashes
will
be more than 120 per minute. If operation is not
as specified, replace the flasher unit.