Key Positions - Hyundai ELANTRA 2006 Owner's Manual

Hide thumbs Also See for ELANTRA 2006:
Table of Contents

Advertisement

2
DRIVING YOUR HYUNDAI

KEY POSITIONS

4
C040A01A-AAT
!
WARNING:
The engine should not be turned
off or the key removed from the
ignition key cylinder while the ve-
hicle is in motion. The steering
wheel is locked by removing the
key.
ACC
LOCK
ON
START
C040A01E
o "START"
The engine is started in this position. It
will crank until you release the key.
NOTE:
Do not hold the key in the "START"
position for more than 15 seconds.
o "ON"
When the key is in the "ON" position,
the ignition is on and all accessories
may be turned on. If the engine is not
running, the key should not be left in
the "ON" position. This will discharge
the battery and may also damage the
ignition system.
o "ACC"
With the key in the "ACC" position, the
some electrical accessories (radio etc.)
may be operated.
o "LOCK"
The key can be removed or inserted in
this position.
To protect against theft, the steering
wheel locks by removing the key.
NOTE:
To unlocking the steering wheel,
insert the key, and then turn the
steering wheel and key simulta-
neously.
C070C01A-AAT
To remove the ignition key
ACC
LOCK
ON
START
C070C01E
1. Turn the ignition key to the "ACC"
position.
2. Simultaneously push and turn the
ignition key counterclockwise from
the "ACC" position to the "LOCK"
position.
3. The key can be removed in the
"LOCK" position.

Advertisement

Table of Contents
loading

Table of Contents