Table of Contents
Advertisement
Getting started
• Never: To never prompt for the provisioning server address.
• Cancel: To cancel the prompt and display the Login screen.
3. After you have pressed Config, enter the provisioning server address in the Address field.
The address is an alphanumeric URL. For example, http://myfileserver.com/
j100/.
Tip:
To enter the dot symbol (.) in the field, press the alphanumeric soft key to toggle to the
ABC mode.
To enter the forward slash symbol (/) in the field, press the / soft key.
4. (Optional) Enter the Group number.
Obtain the Group number from your system administrator. The value ranges from 0 to 999.
If you do not enter a value, the phone uses the default value of 0.
5. Press Save.
The phone continues the boot process and connects to the provisioning server.
Identifying the device type during phone boot-up
About this task
Avaya J100 Series IP Phones screen displays the device type during the phone boot-up. This
feature is supported from the phone software version 4.0.3 and later.
Procedure
1. Set up the phone hardware.
2. Plug the Ethernet cable to the phone.
The phone powers up and starts to initialize.
The phone backsplash screen displays Open SIP text.
Logging in to your phone
Before you begin
Your extension and password are provided by your administrator.
Procedure
1. On the Login screen in the Username field, type your extension.
December 2021
Using Avaya J139 SIP IP Phone in Open SIP
Comments on this document? infodev@avaya.com
22
Advertisement
Table of Contents
