Table of Contents
Advertisement
No.
Task
3.
Ensure that a file server is installed and
configured.
DHCP server configuration
Configure the DHCP server to:
• Dynamically assign IP addresses to Avaya Vantage
• Provision device and site-specific configuration parameters through various DHCP options.
Setting up a DHCP server
Procedure
1. Install the DHCP server software according to the server software vendor's instructions.
Avaya Vantage
configured. Contact your server software vendor to obtain server software installation and
configuration instructions.
2. Configure the available range of IP addresses.
3. Configure the required DHCP options.
File server configuration
A file server is an HTTP or HTTPS server that is used for downloading and storing software
distribution packages, setting files, and other files required for Avaya Vantage
When Avaya Vantage
specified file servers.
You can provide file server addresses using one of the following methods:
• DHCP
• LLDP
• The Settings menu on the Avaya Vantage
• 46xxsettings.txt settings file
For LLDP, DHCP, and the settings file, use the FILE_SERVER_URL parameter to assign the file
server address.
November 2017
™
supports any DHCP server software as long as the software is correctly
™
starts or restarts, it checks for software updates and settings files on the
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Notes
Contact your file server vendor to receive
installation documentation. For configuration
information, see
File server configuration
page 29.
™
devices.
™
device
Server configuration
on
™
devices.
™
29
Advertisement
Table of Contents
