Preinstallation Checklist For Static Addressing; Assigning Static Ip Address - Avaya 9601 Installing And Maintaining

Preinstallation checklist for static addressing

Before performing static addressing, verify all the network requirements first. In addition, you must
have the values for the following parameters:
• IP address of the deskphone.
• IP address of the router.
• IP subnet mask.
• IP address of the HTTP and/or HTTPS server (applicable for only DHCP server settings).
• IP address of the DNS Server.
• VLAN ID (the L2QVLAN value).
• VLANTEST value.

Assigning static IP address

Assigning static IP address
Use static IP addressing, if the setup does not require a DHCP server.
Procedure
1. In the Craft menu, go to ADDR.
2. In the IP Address field, enter the IP address. For the description of other fields, see Static
addressing field descriptions.
3. Use the navigation arrows to scroll to and highlight the address you want to change. Choose
one of the following options:
Option
IP Address IP addresses have four sets of three digits followed by a period. Pressing * followed
VLAN ID
VLANTEST Use the dialpad to enter the new value of the DHCPOFFER wait period of from 0 to
PING
4. Do one of the following:
• Press Save to store the new setting.
August 2016 Installing and Maintaining Avaya 9601/9608/9608G/9611G/9621G/9641G/9641GS IP
Description
by three digits causes a period to be placed in the next position, and the cursor to
advance one position to the right.
Use the dialpad to enter the new static VLAN ID of from 0 to 4094, inclusive.
999, inclusive.
Use the dialpad to enter the host server IP address or the DNS name of the server
you want to check.
The deskphone sends four pings and displays the results in a text block screen. If the
ping fails, the following message is displayed.
Unable to contact host
Comments on this document? infodev@avaya.com
Administration through the deskphone
Deskphones SIP 33