Configuration Restrictions And Guidelines; Configuration Procedure; Configuring The Garp Timers - HP 3100 Series Configuration Manual

Configuration restrictions and guidelines

•
GVRP can work with STP, RSTP, or MSTP CIST but not PVST. When GVRP runs on the CIST,
blocked ports on the CIST cannot receive or send GVRP packets. For more information about
STP, RSTP, MSTP CIST, and PVST, see "Configuring spanning tree protocols."
•
Do not enable both GVRP and remote port mirroring. Otherwise, GVRP may register the
remote probe VLAN to unexpected ports, resulting in undesired duplicates to be received by the
monitor port. For more information about port mirroring, see Network Management and
Monitoring Configuration Guide.
•
Enabling GVRP on a Layer 2 aggregate interface enables both the aggregate interface and all
selected member ports in the corresponding link aggregation group to participate in dynamic
VLAN registration and deregistration.

Configuration procedure

To configure GVRP functions on a trunk port:
Step
Enter system view.
1.
Enable GVRP globally.
2.
Enter Ethernet interface
3.
view, Layer 2 aggregate
interface view, or port
group view.
Configure the link type
4.
of the ports as trunk.
Assign the trunk ports
5.
to all VLANs.
Enable GVRP on the
6.
ports.
Configure the GVRP
7.
registration mode on
the port.

Configuring the GARP timers

Step
Enter system view.
1.
Command
system-view
gvrp
•
Enter Ethernet interface view or
Layer 2 aggregate interface view:
interface interface-type
interface-number
•
Enter port group view:
port-group manual
port-group-name
port link-type trunk
port trunk permit vlan all
gvrp
gvrp registration { fixed | forbidden |
normal }
Command
system-view
142
Remarks
N/A
Globally disabled by default.
Use either command.
Access by default.
For more information about the
port link-type trunk command,
see Layer 2—LAN Switching
Command Reference.
By default, a trunk port is
assigned to VLAN 1 only.
For more information about the
port trunk permit vlan all
command, see Layer 2—LAN
Switching Command Reference.
Disabled by default.
Optional.
normal by default.
Remarks
N/A