Protocols And Standards; Configuring Basic Vlan Settings; Configuration Restrictions And Guidelines; Configuration Procedure - HP 3100 Series Configuration Manual

•
The HPE 3100 v2 EI switches support port-based VLAN, MAC-based VLAN, and
protocol-based VLAN.
•
The HPE 3100 v2 SI switches support port-based VLAN and MAC-based VLAN.
•
On a port configured with port-based VLAN, MAC-based VLAN, and protocol-based VLAN, the
switch determines which VLAN a packet that passes through the port should be assigned to by
looking up the VLANs in the default order of MAC-based VLAN, protocol-based VLAN, and
port-based VLAN.

Protocols and standards

IEEE 802.1Q, IEEE Standards for Local and Metropolitan Area Networks: Virtual Bridged Local Area
Networks

Configuring basic VLAN settings

Configuration restrictions and guidelines

•
As the default VLAN, VLAN 1 cannot be created or removed.
•
You cannot manually create or remove VLANs reserved for special purposes.
•
To delete a protocol reserved VLAN, voice VLAN, management VLAN, dynamic VLAN, VLAN
with a QoS policy applied, control VLAN for a smart link group, control VLAN for an RRPP
domain, remote probe VLAN for remote port mirroring, remove the configuration from the VLAN
first, and execute the undo vlan command.

Configuration procedure

To configure basic VLAN settings:
Step
Enter system view.
1.
Create a VLAN and
2.
enter its view, or create
VLANs in batch.
Enter VLAN view.
3.
Configure a name for
4.
the VLAN.
Configure a description
5.
for the VLAN.

Configuring basic settings of a VLAN interface

You can use VLAN interfaces to provide Layer 3 communication between hosts of different VLANs.
VLAN interfaces are virtual interfaces used for Layer 3 communication between different VLANs.
Command
system-view
vlan { vlan-id1 [ to vlan-id2 ] |
all }
vlan vlan-id
name text
description text
106
Remarks
N/A
Optional.
By default, only the default VLAN (VLAN
1) exists in the system.
Required only when you create VLANs in
bulk.
Optional.
By default, the name of a VLAN is its
VLAN ID (VLAN 0001, for example).
Optional.
The default description is VLAN vlan-id,
which is the ID of the VLAN. For example,
the description of VLAN 100 is VLAN
0100 by default.