Displaying And Maintaining Gvrp - HP 3100 Series Configuration Manual

Step
Configure the GARP
2.
LeaveAll timer.
Enter Ethernet interface
3.
view, Layer 2 aggregate
interface view, or port
group view.
Configure the Hold timer.
4.
Configure the Join timer.
5.
Configure the Leave timer.
6.
As shown in
following guidelines to configure GARP timers:
•
If you want to set a value beyond the value range for a timer, you can change the value range by
tuning the value of another related timer.
•
If you want to restore the default settings of the timers, restore the Hold timer first, followed by
the Join, Leave, and LeaveAll timers.
Table 19 Dependencies of the GARP timers
Timer
Hold
Join
Leave
LeaveAll
NOTE:
To keep the dynamic VLANs learned through GVRP stable, do not set the LeaveAll timer smaller
than its default value, 1000 centiseconds.

Displaying and maintaining GVRP

Task
Display statistics about GARP
on ports.
Display GARP timers on ports.
Command
garp timer leaveall timer-value
•
•
garp timer hold timer-value
garp timer join timer-value
garp timer leave timer-value
Table 19, the value ranges for GARP timers are dependent on one another; use the
Lower limit
10 centiseconds
No less than twice the Hold timer
Greater than twice the Join timer
Greater than the Leave timer
Command
display garp statistics [ interface interface-list ] [ |
{ begin | exclude | include } regular-expression ]
display garp timer [ interface interface-list ] [ |
{ begin | exclude | include } regular-expression ]
Enter Ethernet interface view or
Layer 2 aggregate interface
view:
interface interface-type
interface-number
Enter port group view:
port-group manual
port-group-name
Upper limit
No greater than half of the Join timer
Less than half of the Leave timer
Less than the LeaveAll timer
32,765 centiseconds
143
Remarks
Optional.
1000 centiseconds by default.
The LeaveAll timer applies to all
ports.
Use either command.
Optional.
10 centiseconds by default.
Optional.
20 centiseconds by default.
Optional.
60 centiseconds by default.
Remarks
Available in
any view
Available in
any view