Configuration Restrictions And Guidelines; Ethernet Link Aggregation Configuration Task List; Configuring An Aggregation Group; Configuration Guidelines - HP 3100 Series Configuration Manual

You can choose one of the following criteria or any combination for load sharing:
•
Source/Destination MAC addresses
•
Source/Destination IP addresses

Configuration restrictions and guidelines

Follow these guidelines when you configure a link aggregation group:
•
To ensure stable aggregation state and service continuity, do not change port attributes or
class-two configurations on any member port. If you must, make sure you understand its impact
on the live network. Any port attribute or class-two configuration change might affect the
aggregation state of link aggregation member ports and ongoing traffic.
•
Avoid assigning ports to a static aggregation group that has reached the limit on Selected ports.
These ports will be placed in Unselected state to avoid traffic interruption on the current
Selected ports. However, a device reboot can cause the aggregation state of member ports to
change.

Ethernet link aggregation configuration task list

Task
Configuring an
aggregation group
Configuring an
aggregate interface
Configuring load
sharing for link
aggregation groups

Configuring an aggregation group

Configuration guidelines

•
You cannot assign a port to a Layer 2 aggregation group if any of the features listed in
configured on the port.
Table 6 Features incompatible with Layer 2 aggregation groups
Feature
RRPP
MAC authentication
Port security
Configuring a static aggregation group
Configuring a dynamic aggregation group
Configuring the description of an aggregate interface
Enabling link state traps for an aggregate interface
Limiting the number of Selected ports for an aggregation
group
Shutting down an aggregate interface
Restoring the default settings for an aggregate interface
Configuring load-sharing criteria for link aggregation groups
Reference
RRPP in High Availability Configuration Guide
MAC authentication in Security Configuration Guide
Port security in Security Configuration Guide
35
Remarks
Select either task
Optional
Optional
Optional
Optional
Optional
Optional
Table 6 is