Planmeca ProMax 3D s User Manual page 55

12.1.2 Time and Date (1200)
User's Manual (3D)
• Set time display format
Select User > 1200 Time and date > 1210 Set System
Time and Time / Date Display Format > Time Display
Format. Then select the display format you wish to use.
• Set date display format
Select User > 1200 Time and Date > 1210 Set System
Time and Time / Date Display Format > Date Display
Format. Then select the display format you wish to use.
• Set time
NOTE The time is set to the local time at the factory. Change
the time setting to show the correct time before you
start using the X-ray unit.
Select User > 1200 Time and Date > 1210 Set System
Time and Time / Date Display Format > Change System
Time. Then use the plus and minus buttons to change the
time.
Planmeca ProMax 3D s & 3D Classic with ProTouch 51
SETTINGS