Planmeca ProMax 3D s User Manual page 40

3D PATIENT EXPOSURE
Rotate C-arm
90 degrees
Patient support table
Back
Front
36 Planmeca ProMax 3D s & 3D Classic with ProTouch
Thumb wheel
(side light = Y laser)
OR
Positioning joystick
(side light = Y laser)
Side light (Y laser)
First rotate the C-arm 90 degrees clockwise by touching
the 90° button at the bottom of the screen. This will give
you a better view for checking the volume position.
Touch the button again if you wish to rotate the C-arm
back to the original position.
If you need to move the image volume to the front or back
do one of the following:
• Move the thumb wheel that is located on the underside
of the patient support table.
• Move the positioning joystick towards you or away
from you.
The side light (i.e. the image volume center as seen from
the side) will move accordingly.
Front Back
Image volume
User's Manual (3D)