Planmeca ProMax 3D s User Manual page 38

3D PATIENT EXPOSURE
9.5.1 Moving image volume vertically (Z laser)
Adjustable adapter
Upper jaw
half selected
34 Planmeca ProMax 3D s & 3D Classic with ProTouch
The volume bottom light (Z laser) indicates the position
where the lower edge of the image volume is.
Check that the image volume is positioned at the correct
height for the exposure you wish to take. If needed,
reposition the patient as described in section 9.1.3
"Adjusting adapter height" on page 22.
Volume bottom light
NOTE If the upper jaw half is selected, the lower edge of the
image volume is positioned 30 mm above the volume
bottom light.
Up
Image volume
Down
User's Manual (3D)