Planmeca ProMax 3D s User Manual page 34

3D PATIENT EXPOSURE
9.2.9 Reducing diameter of adjoining volume(s) (3D Double / Triple Scan only)
Reduced
diameter
selected
9.2.10 Selecting 3D face photo (X-ray units with ProFace sensor)
30 Planmeca ProMax 3D s & 3D Classic with ProTouch
In 3D Double Scan and 3D Triple Scan programs all
image volumes have got the same diameter by default.
Use the third button on the left of the screen if you wish to
reduce the diameter of the adjoining image volume(s).
NOTE All image volumes are the same height.
If the X-ray unit has a ProFace sensor, you can take a 3D
photo of the patient's face at the same time as you take
an X-ray image. Select the last button on the left of the
screen to take both images at the same time.
ProFace sensor
Smaller adjoining
image volume
Select 3D face photo
User's Manual (3D)