3D PATIENT EXPOSURE
Head support B: Attaching head band
Head band
Support bars
9.1.3
Adjusting adapter height
Chin cup
Adjustable adapter
22 Planmeca ProMax 3D s & 3D Classic with ProTouch
Large openings
Chin support
If you are using the head band, attach it to the support
bars as shown. The side with the large openings should
be against the patient's forehead.
Use a chin cup or chin support for patient positioning. First
insert the chin cup / chin support into the adjustable
adapter.
Then insert the adjustable adapter into the holes in the
middle of the patient support table.
The adjustable adapter has five height positions. The
patient's head has to be positioned at the correct height
by lowering or raising the adapter as follows. The lower
the patient is positioned, the higher the image position will
be.
User's Manual (3D)