Planmeca ProMax 3D s User Manual page 36

3D PATIENT EXPOSURE
9.4.2 Positioning patient's head
Down
32 Planmeca ProMax 3D s & 3D Classic with ProTouch
Up
Volume bottom light
1. Guide the patient to the X-ray unit. The patient can sit
or stand during the exposure.
2. Adjust the X-ray unit to suit the height of the patient. To
do this, press either of the height adjusting buttons
until the chin cup / chin support is approximately level
with the patient's lower jaw.
The positioning lights come on:
3. Ask the patient to grasp the patient handles.
4. Check that the patient's head is firmly positioned in the
head support.
• You can adjust the head support by turning the
adjusting knob at the top.
• You can use fastening straps for additional head
support if needed. Refer to section 9.1.2 "Attaching
head support" on page 20 for details.
Volume center lights
(front and side lights)
User's Manual (3D)