Planmeca ProMax 3D s User Manual page 39

9.5.2 Moving image volume horizontally (X and Y lasers)
Volume center lights:
Front light
(X laser)
Left
Positioning joystick
(front light = X laser)
User's Manual (3D)
The volume center lights cross in the middle of the image
volume. With the patient positioned in the unit, the volume
center lights form red lines on the front (front light) and on
the left side (side light) of the patient's head.
Image volume
Check that the image volume is positioned correctly for
this patient. If you need to adjust the volume position,
proceed as follows.
Front light (X laser)
If you need to move the image volume to your left or right:
• Move the positioning joystick to your left or right. The
front light (i.e. the image volume center as seen from
the front) will move accordingly.
Right
Left
Planmeca ProMax 3D s & 3D Classic with ProTouch 35
3D PATIENT EXPOSURE
Side light
(Y laser)
Right
Image volume