Working On The Electric Fittings; Delivery, Transport, Installation And Assembly; Delivery; Transport And Installation - Meiko UPster K Operating Instructions Manual

6.1

Working on the electric fittings

Risk of injury due to electric shock
Work or repairs to the electrical equipment of the system must be conducted by a
qualified electrician!
The wiring diagram for the partially completed machine delivered contains all neces-
sary operational shut-offs known to the manufacturer MEIKO, as well as other
known, necessary shut-offs and electrical connections. Connections have been il-
lustrated on the wiring diagram. Always make sure that these connections are im-
plemented prior to commissioning the machine, and that they work reliably.
If any unknown sources of danger that are not described by MEIKO arise due to
connecting system parts, you must eliminate them; this may potentially mean that
you must not operate the machine.
7

Delivery, transport, installation and assembly

7.1

Delivery

Check that the delivery is complete immediately after receiving it by comparing it to
MEIKO's contract confirmation and/or the delivery note.
If necessary, complain about any missing parts immediately to the shipping company
and notify MEIKO.
Check the entire installation for any damage that may have occurred during shipping.
In the event of any transport damage, please inform MEIKO immediately in writing,
and also send a photo of the damaged parts to us.
7.2

Transport and installation

Risk of injury caused by heavy loads!
In order to avoid damaging the machine and causing serious injury during transport,
loading, unloading and transport must be carried out by qualified personnel as per
locally applicable occupational safety instructions.
Read the chapter "General safety instructions".

For safe transport, the machine is supported by a special square-timber frame.

Open packaging using a suitable tool.

Observe transport instructions on the packing.

Handle with care.

Unpack the machine.
DANGER
NOTE
WARNING

13 / 40
The machine must only be trans-
ported on the supplied wooden
frame. The packing is specifically
designed to allow the appliances to
be moved safely and securely us-
ing a pallet jack or a sack truck.
9726766