Install Pump - New Holland TS-100A Assembly & Instruction Manual

Pump / Drive Assembly Instructions
Pump Shipped w/ Hyd. Tank, Valve
Driveshaft & Pump
is bolted to Tank
Mount Weldment
installed
Figure 11
Figure 12
Tighten Clamp Yoke, leave
Align Splines on Pump Shaft
1/8" to 1/4" gap btween
with Driveshaft clamp yoke.
yoke & pump
Figure 14
Figure 13
Push Pump into Pump

Install Pump

Mount until flush
Mounting Bolts
Figure 16
Figure 15
Maverick (NH TS-100A,115A,125A, 135A Asy. Man) 01/05
© 2005 Alamo Group Inc. Section 3 - 6