Table of Contents
Advertisement
CONTROL VALVE - ELECTRONIC NETWORK
Maverick Electronic Network
( continued)
The XP2 The XP2 is a controller module
that is mounted at the front of the tractor next to the
maverick control valve. The function of this compo-
nent is to provide a gateway for incoming and outgo-
ing information. Information is sent via the network to
this module in order to provide control of the sole-
noids for valve operation (See Figure 9) REFER-
ENCE PRODUCT MANUAL FOR MDM DISPLAY.
THIS MANUAL IS AVAILABLE FROM THE MANU-
FACTURER
ON
www.iqan.com viewable and printable with
ADOBE ACROBAT READER. If you do not have
Adobe Acrobat Reader it can be obtained at
www.adobe.com.
The XT2. The XT2 is also a controller mod-
ule that is mounted at the front of the tractor on the
side of the tank, The function of this component is to
provide a gateway for incoming and outgoing infor-
mation. This module receives input from instrumen-
tation, then provides that information to the network
for further utilization. (See Figure 10) REFER-
ENCE PRODUCT MANUAL FOR MDM DISPLAY.
THIS MANUAL IS AVAILABLE FROM THE MANU-
FACTURER
ON
www.iqan.com viewable and printable with
ADOBE ACROBAT READER. If you do not have
Adobe Acrobat Reader it can be obtained at
www.adobe.com.
The XS The XS is expansion module that
provides extra input and output capabilities in order
to gain more flexibility on the network (See Figure
11). The XS is responsible for receiving the signals
from the joystick and other in cab inputs and making
them available on the network. REFERENCE
PRODUCT MANUAL FOR MDM DISPLAY. THIS
MANUAL IS AVAILABLE FROM THE MANUFAC-
TURER ON THE INTERNET AT www.iqan.com
viewable and printable with ADOBE ACROBAT
READER. If you do not have Adobe Acrobat
Reader it can be obtained at www.adobe.com.
New Holland (NH TS-100A, 115A, 125A, 135A Asy. Man) 01/05
© 2005 Alamo Group Inc.
:
THE
INTERNET
THE
INTERNET
AT
FIGURE 9
AT
FIGURE 10
FIGURE 11
Section 10 - 7
Hide quick links:
Advertisement
Table of Contents
