New Holland TS-100A Assembly & Instruction Manual page 12

SPECIFICATIONS - MAVERICK
2. BOOM SPECIFICATIONS
Boom Reach 24 Foot Boom......................................................... Out 24'
Boom Reach 30 Foot Boom......................................................... Out 30'
Frame............................................................................................ Manufactured Box Sections
Pins................................................................................................Chrome Plated Alloy
Bushings........................................................................................Greasable
Weight, 24' Boom.......................................................................... 1250 lbs.
Weight, 30' Boom.......................................................................... 1450 lbs
Boom Rest.................................................................................... Tractor Axle Mounted
Boom Mounting..............................................................................ROPS or CAB Tractor Optional
3. FILTRATION
Control Valve Functions: Control
Maverick Boom. The boom and frame cylinders are powered by a self contained hydraulic system. The
pump is loctated on the front of the tractor. There is an in-line pressure filter (P/N 02981371) between
the closed center load sense pump and cylinder control valve. There is a return filter (P/N 02981391)
mounted to the tank that filters the fluid returning from the control valve to the tank. Filter change
recommended for every 200 to 250 hours. An electronic monitoring system monitors element back
pressure for indication of clogged filter prior to element change.
Mower Head Functions
front of the Tractor Engine. This will have an in-line Filter installed into hydraulic circuit, This filter should
be changed on a regular maintenance schedule. Filter are rated by Micron size (10 Micron), Filters
should be replaced with original Alamo Industrial Replacement Filters to make certain the correct
rated filter element is installed at all times. (Pressure Filter is P/N 02968922 and Return Filter
Replacement Element is P/N 02968923)
4. HYDROSTATIC PUMP SPEC'S
Cutter Head Pump Circuit Spec's:
Pump Type............................................................... Piston Type
Pump Speed (Front Engine Mounted)......................Run Engine to 540 PTO Speed
Relief Setting at the Pump........................................4500 PSI
Pump Flow (Front Engine Operating Speed)...........25.3 GPM
Boom Cylinder Pump Circuit Spe'c's:
Pump Type............................................................... Piston Type
Pump Speed............................................................ 1800 RPM
Pump Flow (Front Engine Operating Speed)...........15.6 GPM
Low Pressure Standby............................................. 250 PSI
High Pressure Comp................................................3000 PSI
Horse Power at 1850 RPM (Engine Speed)............ 28.5 HP
5. HYDRAULIC HOSE CODES
Hydraulic Hose Band Mark Color Codes:
Hose's and/or fittings are marked with a Color Coded Plastic Band around it. Some Bands
are a solid Color and some have a Colored with a Stripe. The purpose of the colored bands
are to provide a quick reference for hose and port connection. A metal band is also attachted
to the hose, on that band is an Alamo Industrial Part Number for reference if needing a
replacement hose.
Maverick (NH TS-100A, 115A, 125A, 135A Asy. Man) 01/05
© 2005 Alamo Group Inc.
functions include All Hydraulic Cylinders used to manipulate the
:
Mower
Head Functions are operated by Pump, which is mounted to the
Always Check Hose Size, Color Code & Part Number
Section 1 - 4