Tank Hose Routing - New Holland TS-100A Assembly & Instruction Manual

"J" # 16 Hose
(Red Plastic Tie)
"K" # 16 Hose
(Orange Plastic Tie)
"C" # 12 Hose
Suction Hose
(No Plastic Tie)
"G" # 20 Hose
Suction Hose
(No Plastic Tie)
"A" # 8 Hose
(Red Plastic Tie)
"L" # Hose
(Blue Plastic Tie)
"D" # 12 Hose
(Red Plastic Tie)
"H" # 12 Hose
(Orange Plastic Tie)
Figure 2
NOTE: Hoses are not shown in drawing above, this is for clarity. The hose routing is for the hoses which
connect from one point to the other. Use the instructions and hose description listed to follow hose
routing.
Example: Hose - A connects to one end marked A and the other end of hose connects to the other item
marked A. This is done with the other letters as well, the hose must connect to the same letter markings
on each end as in drawing. Some hose will be marked with a colored plastic tie.
Some hose will have a straight fitting or a 90° fitting. This is to allow hoses to be routed to where they
clear other items, when connecting hose put the end on that has the correct fitting as noted in drawing
with (90°) or the straight fitting if note marked hose routing that is to make hoses clear other items. Do
Not connect hose to different letter items, all hose end must connect to the same letter on both ends.
TO ID HOSES: Always check Size, Length, Fittings and Color Plastic Tie to identify the hoses. Some
hoses will have the same color tie but the size, length or fittings will be different.
Maverick (NH TS-100A,115A , 125A, 135A Asy. Manl) 01/05
© 2005 Alamo Group Inc.
Hydraulic Tank Hose Routing
"B" # 8 Hose
(90° Elbow)
(Blue Plastic Tie)
(Red Plastic Tie)
"G" # 20 Hose
Suction Hose
(No Plastic Tie)
"E" # 4 Hose (90° Elbow)
(Red Plastic Tie)
"A" # 8 Hose
(90° Elbow)
Section 4 - 3
"E" # 4 Hose
(Red Plastic Tie)
"D" # 12 Hose
(Red Plastic Tie)
"H" # 12 Hose
(90° Elbow)
(Orange Plastic Tie)
"B" # 8 Hose
(Blue Plastic Tie)
"F" # 4 Hose & Tee
Tank Return
(Blue Plastic Tie)
"F" # 4 Hose
(90° Elbow)
(Blue Plastic Tie)