Engine - Install; Install (*) - New Holland T4.75 Service Manual

Engine - Install

T4.105 with cab, with mechanical or power shuttle transmission [ZxJT0xxxx]
T4.105 less cab, with mechanical or power shuttle transmission [ZxJT0xxxx]
T4.115 with cab, with mechanical or power shuttle transmission [ZxJT0xxxx]
T4.115 less cab, with mechanical or power shuttle transmission [ZxJT0xxxx]
T4.75 with cab, with mechanical or power shuttle transmission [ZxJT0xxxx]
T4.75 less cab, with mechanical or power shuttle transmission [ZxJT0xxxx]
T4.85 with cab, with mechanical or power shuttle transmission [ZxJT0xxxx]
T4.85 less cab, with mechanical or power shuttle transmission [ZxJT0xxxx]
T4.95 with cab, with mechanical or power shuttle transmission [ZxJT0xxxx]
T4.95 less cab, with mechanical or power shuttle transmission [ZxJT0xxxx]
1. Refit the flexible belt on the alternator and take up the
slack according to the procedure in Alternator - Ten-
sion adjust (55.301).
2. Reposition the compressor and the relevant belt follow-
ing this procedure:
- Put the compressor back on the support and with the
related pipe support. Secure with the bolts
– To mount the polyv belt, use the specific tool
380200011.
(1). Compressor clutch actuator drive bracket.
(2). polyv belt pulley outer edge.
(3). Tool recess. Used to drive the tool. This recess
houses the bracket (1).
(4). Tail. Used to drive the polyv belt in the pulley seat.
(5). Hitching. Thanks to this recess, where the outer
edge (2) is housed, the tool remains hitched to the com-
pressor.
Engine - Engine and crankcase
47803847 15/12/2014
10.1 [10.001] / 23
1
WLAPL4S10C101C