New Holland TS-100A Assembly & Instruction Manual page 107

Install Front Pump & Tank Cover
1. Install The Front Pump / Tank Cover. The front
cover and tank cover are a bolt on part. The hinges are
made onto the cover and the other half of the hinges are
made on the tank mount bracket. There are two bolts (one
each hinge) that bolt the two hinge halves together. The
is a safety cable that will bolt to the cover and the tank
mount bracket, this is to prevent the cover from opening
to far forward and hitting the ground.
There are retaining latches that will bolt to the tank
mount bracket and the cover. The holes for the fasteners
will have to drilled by the installation technician in the tank
mount brackets and the front cover. (See Figure 19, 20,
21 & 22)
FIGURE 20
FIGURE 22
New Holland (NH TS-100A, 115A, 125A, 135A Asy. Man) 01/05
© 2005 Alamo Group Inc.
Install Front Pump & Tank Cover
:
FIGURE 19
FIGURE 21
Section 10 - 13