Rear Brake Adjustment - Yamaha ttr230 Service Manual

REAR BRAKE ADJUSTMENT

NOTE:
If the bleeding is difficult, it may be
necessary to let the brake system stabilize
for some hours. Repeat the bleeding proce-
dure when the small bobbles have vanished
from the system.
j. Replenish the brake fluid up to the level.
V
Check the brake system operation after the
bleeding.
************************************
REAR BRAKE ADJUSTMENT
1. Check:
• Brake pedal height a
Out of specification => Adjust.
2. Adjust:
• Brake pedal height
************************************
Adjustment steps:
• Loosen the lock-nut2.
• Turn the adjuster 1 inward or outward
until establish the specified height.
3-30
Recommended brake fluid:
DOT #4
WARNING
Brake pedal height:
3 mm (0.12 in) below the top of
the footboard.
To turn inward => Increases the
pedal height.
To turn outward => Reduces the
pedal height.
INSP
ADJUS