CARBURETOR
DISMOUNTING
NOTE:
The following parts can be cleaned
and checked with no need for dismounting:
• Pilot screw
• Choke
• Idle speed screw
1. Disconnect:
• Choke assembly 1
2. Remove:
• Carburetor bowl 1
• Pilot screw 2
3. Remove:
• Float pin 1
• Float 2
• Needle valve assembly 3
NOTE:
Remove the float pin in the arrow direction.
4. Remove:
• Main adjusting nozzle 1
• Pilot adjusting nozzle 2
• Diffuser 3
• Needle valve seat 4
5-3
CARB