Rear Brake Pedal Height And Free Play Adjustment - Yamaha TW200M 1999 Owner's Manual

b
1
2
a
1. Adjusting nut
2. Locknut
If the specified free play cannot be
obtained, proceed with the follow-
ing steps.
4. Loosen the locknut at the
brake lever.
5. Turn the adjusting bolt at the
brake lever in direction a to
loosen the cable.
6. Loosen the locknut at the
brake hub.
7. Turn the adjusting nut at the
brake hub in direction a to
increase free play or in direc-
tion b to decrease free play.
8. Tighten the locknut at the
brake hub and the brake lever.
PERIODIC MAINTENANCE AND MINOR REPAIR
3
a
b
1 2
1. Locknut
2. Adjusting bolt
3. Footrest
4. Pedal height
Rear brake pedal height and
free play adjustment
w
It is advisable to have a Yamaha
dealer make this adjustment.
Pedal height
The brake pedal should be posi-
tioned so that its top end is
approximately 15 mm below the
top of the footrest.
1. Loosen the locknut.
6-19
2. Turn the adjusting bolt in
direction a to raise pedal
height or in direction b to
lower pedal height.
4
3. Tighten the locknut.
w
After adjusting the pedal height
adjust brake pedal free play.
EAU00707
EW000104
1
2
EW000105
3
4
5
6
7
8
9