Clutch, Oil Pump And Balancer Gear - Yamaha ttr230 Service Manual

ENGINE MOUNTING AND ADJUSTMENTS
14
13
15
CLUTCH, OIL PUMP AND BALANCER
GEAR
1. Install:
• Key 1
• Balancer gear 2
• Plate 3
• Lock washer 4
• Nut 5 (balancer gear)
• Special washer 6
• Key 7
• Balancer driving gear and
impact hub 8
• Special washer 9
• Primary gear 0
• Lock washer A
• Nut B (primary gear)
Nut (balancer gear)
50N.m (5.0 Kg.m; 36 ft.Ib)
Nut (primary gear):
60N.m (6.0 Kg.m; 43.5 ft.Ib)
NOTE:
• When installing the primary gear, align
the punch mark
the punch mark
• Place a cloth or an aluminum plate
between the teeth of the primary and
balancer shaft gears.
• Take care not to damage the teeth of
the gears.
2. Fold the lock washer flanges on the nuts
E
4-66
ENGINE
of the driving gear with
of the balancer gear.