1
1
BRAKE LINING CHECK
• Tighten the lock-nut.
After adjusting the height, adjust the free
play of the brake pedal.
*************************************
3. Check:
NOTE:
Before adjusting the free play, adjust the
height of the brake pedal.
4. Adjust:
************************************
Brake pedal free play adjustment steps:
• Turn the adjuster 1 until the free play is
within the specification.
************************************
See Section "BRAKE SHOE CHECK."
BRAKE LINING CHECK
1. Press the brake pedal
2. Check:
2
3-31
Lock-nut:
7N.m (0.7 Kg.m ; 5.1 ft.lb)
V
WARNING
• Brake pedal free play b
Out of specification => Adjust.
Brake pedal height:
20 ~ 30 mm (0.8 ~1.2 in)
• Brake pedal free play
• Wear indicator 1
Indicator at the wear limit mark 2=>
Replace brake linings. See Section
"REAR WHEEL" CHAPTER 6.
INSP
ADJUS