Yamaha ttr230 Service Manual page 289

TROUBLESHOOTING
Procedures
Check:
1. Fuse
2. Battery
3. Charging voltage
4. Stator coil resistance
5. System connections
NOTE:
• Remove the following parts before starting the analysis:
1) Side covers (RH)
2) Seat
• Use the following device for analysis:
Inductive tachometer:
90890-03113
1. Fuse
• Remove fuse.
• Connect the tester (
• Check the fuse for continuity.
See Section "FUSE INSPECTION,"
CHAPTER 3.
2. Battery
• Check battery conditions:
See Section "BATTERY INSPECTION,"
CHAPTER 3.
Minimum tension:12.8 V
BATTERY NOT CHARGING
Ω
x1) to the fuse.
CONTINUITY
CORRECT
CHARGING SYSTEM
Multimeter:
90890-03112
NO CONTINUITY
Defective fuse – replace.
INCORRECT
• Clean terminals.
• Recharge or replace battery.
• Replenish with distilled water.
7-24
ELECT