Installation - Yamaha ttr230 Service Manual

FRONT FORK
NOTE:
• Install the spring with the longest pitch
4 up. 5 shorter pitch.
• Before installing the spring seat, apply
grease to the O-ring.
• Compress the spring seat and install the
lock ring.
13. Install:
• Dust cover 1 (LH)
• Tie wrap 2
• Plastic belt 3
NOTE:
Install the tie wrap and the plastic belt as
shown in the figure.
Cut the plastic belt end 3.
V V V V V
Always use a new plastic belt.

INSTALLATION

Reverse the "REMOVAL" procedure.
1. Install:
• Front fork
Tighten the board screws temporarily.
NOTE:
Adjust the internal tube flush a with the
top of the upper handle-bars board.
a
6-38
FRAME
WARNING