Yamaha ttr230 Service Manual page 279

3. Starter motor
• Connect the battery positive terminal
1 and the starter motor cable 2 using a
jumper wire 3 *as shown.
• Check the starter motor operation.
4. Starting relay
• Disconnect the starting relay connector
from the harness.
• Connect the battery to the starting relay
using jumper wires 1 .
• Check the starter motor operation.
ELECTRIC STARTING SYSTEM
STARTS
STARTS
V
WARNING
The jumper wire capacity should be
compatible with the starter motor capacity.
Otherwise, it may blow.
DOES NOT START
Starter motor defective – Repair or
replace.
DOES NOT START
Starting relay defective – Replace.
CAUTION:
• Take care not to invert the connections.
• Take care not to short-circuit the positive
and negative terminals when connecting
the battery and relay.
7-14
ELECT