Yamaha ttr230 Service Manual page 163

ENGINE MOUNTING AND ADJUSTMENTS
9
8
7
6
5
4
3
2
1
13. Install:
1
• Clutch stem 1
14. Install:
• Stem 2 1
• Ball 2
• Friction disc 3 (type b)
• Separators 4
• Expansion spring 5
• Friction disc 6 (type a)
• Pressure plate 7
• Springs 8
• Bolts 9
NOTE:
• Apply engine oil 4T to the separators.
• Install the separators and friction discs
alternately on the clutch hub, starting and
finishing with a friction disc.
CAUTION:
The friction disc (type A) 6 with the wider
internal diameter should be installed in the
3rd position.
The expansion spring 5 should be placed
inside the 3rd friction disc.
Int. diam. "D"
4-69
Bolt (clutch stem):
12N.m (1.2 Kg.m; 8.7 ft.Ib)
Friction disc
Type "A"
Quantity 1 piece
107 mm
ENGINE
Type "B"
5 pieces
99 mm