OIL PRESSURE CHECK /
CLUTCH ADJUSTMENT
11. Install:
• Oil filling screw
12. Check:
• Oil level
See Section "ENGINE OIL LEVEL
CHECK."
• Oil pressure
See Section "OIL PRESSURE CHECK."
• Oil leakage
OIL PRESSURE CHECK
1. Remove:
• Oil check screw 1
2. Start the engine and let it at idle speed
for several minutes.
3. Check:
• Oil condition at the inspection hole
Oil flowing => Oil pressure correct.
Oil does not flow => Oil pressure
incorrect
CAUTION:
If no oil flows after 1 minute, turn off the
engine immediately.
4. Tighten:
• Oil check screw
Oil check screw:
7N.m (0.7 Kg.m ; 5.1 ft.lb)
CLUTCH ADJUSTMENT
1. Check:
• Clutch cable free play a
Out of specification => Adjust.
Free play:
10 ~15mm at the lever end
3-23
INSP
ADJUS