Clutch, Oil Pump And Balancer Gear - Yamaha ttr230 Service Manual

1
1
ENGINE DISMOUNTING
CLUTCH, OIL PUMP
AND BALANCER GEAR
NOTE:
With the engine installed on the frame, the
clutch and oil pump overhauling is possible,
removing the following parts:
• Crankcase guard
• Brake pedal
1. Remove:
• Case cover 1 (RH)
NOTE:
Loosen the bolts ¼ turn in a cross pattern,
then, remove the bolts.
2. Remove:
2
3. Remove:
NOTE:
Loosen the bolts ¼ turn in a cross pattern,
then, remove the bolts.
4-15
• Dowel pins 1
• Gaskets 2 (case cover)
• Bolts 1
• Springs 2
• Pressure plate 3
• Friction discs 4 (type A)
• Pressure spring 5
• Separators 6
• Friction disc 7 (type B)
• Ball 8
• Stem 9
ENGINE