Yamaha ttr230 Service Manual page 180

ENGINE MOUNTING AND ADJUSTMENTS
2
1
1
1
2
1
3
9. Connect:
• Ground wire 1
• Starter motor wire 2 to case
10. Apply:
• Lithium-based grease
(to starter motor O-ring)
11. Install:
• Starter motor 1
12. Connect:
• Starter wire 2
(to starter motor and fasteners)
13. Connect:
• Magnet harness 1
• Plastic belt 2
• Spark plug cap 3
2
14. Install:
• Clutch cable
15. Adjust:
• Clutch cable free play
See Section "CLUTCH ADJUSTMENT"
CHAPTER 3.
4-86
ENGINE
Bolt:
7N.m (0,7 Kg.m; 155,45 cm.Ib)
Bolt (starter motor):
7N.m (0.7 Kg.m; 5.1 ft.Ib)
Clutch lever end free play:
10~15 mm