Yamaha ttr230 Service Manual page 256

REAR SHOCK ABSORBER AND BALANCE
1
Rear Balance
Reverse the "REMOVAL" procedure.
1. Lubricate
• Retainer
• Bearings
• Stop caps (inside)
• Spacers
• Shafts
• Hinges
Lithium-based grease
2. Tighten:
• Nut (connection arm - relay arm)
Nut:
52.5 N.m (5.2 kgf.m; 25 ft.lb)
3. Tighten:
• Nut (balance - relay arm)
Nut:
52 N.m (5.2 kgf.m; 37.6 ft.lb)
4. Install:
• Rubber caps
5. Tighten:
• Balance shaft 1
Nut 1:
80 N.m (8.0 kgf.m; 48 ft.lb)
6. Tighten:
• Nut (frame - relay arm connection)
Nut:
52 N.m (5.2 kgf.m; 37.6 ft.lb)
6-61
FRAME