REAR BRAKE ADJUSTMENT
EB304012
REAR BRAKE ADJUSTMENT
1. Check:
S Brake pedal height a
Out of specification ! Adjust.
2. Adjust:
S Brake pedal height
***************************************
Adjustment steps:
S Loosen the locknut 1 .
S Turn the adjuster 2 in or out until the specified
pedal height is obtained.
Turning in:
Turning out:
S Tighten the locknut.
***************************************
3. Check:
S Brake pedal free play a
Out of specification ! Adjust.
4. Adjust:
S Brake pedal free play
***************************************
Adjustment steps:
Turn the adjuster 1 in or out until the speci-
fied free play is obtained.
Turning in:
Turning out:
CAUTION:
Make sure that there is no brake drag after
adjusting the brake pedal height and the free
play.
***************************************
–19–
INSP
ADJ
Brake pedal height:
108 mm
(above the top of the footrest)
brake pedal height is
decreased.
brake pedal height is
increased.
Locknut:
7 Nm (0.7 mSkg)
Free play (brake pedal):
20 X 30 mm
brake pedal free play is
decreased.
brake pedal free play is
increased.