Yamaha ttr230 Service Manual page 65

1
ENGINE OIL CHANGE
3. Remove:
Oil filling screw1
Drain plug 2
NOTE:
When removing the drain plug 2, the
spring 3, oil strainer 4, and O-ring 5 will
come out. Take care not to lose these parts.
2
4. Drain:
Engine oil
5. Remove:
Bolt 1 (oil filter cover)
NOTE:
The oil filter cover is fastened by 3 bolts.
The bolt 1 should be removed in order to
drain the oil filter cavity.
6. Inspect:
O-ring (Drain plug)
Damages => Replace.
7. Clean:
Oil strainer
Clean using kerosene.
Clogging/damage => Replace.
8. Install:
Bolt 1 (oil filter cover)
Drain plug
CAUTION:
Before reinstalling the drain plug, install the
O-ring, spring and oil strainer.
3-19
INSP
ADJUS