Druck ADTS 405 User Manual
CONFIG, [MORE], [SETUP MODE]
This function enables, disables or limits access to the secondary functions. There are
three set-up modes:
FULL
This mode provides complete access to all secondary functions when the SETUP
key is pressed. All pressure and aeronautical units can be selected.
MINIMUM
This mode provides limited access to the secondary functions when the SETUP
key is pressed. This prevents access to error recovery, rate timers etc. Units can
only be changed between two pre-selected types, for full details see section 6.3.
OFF
This mode prevents access to all secondary functions.
CONFIG, SPEED, [AUTO ZERO]
CONFIG equivalent of SETUP function.
CONFIG, SPEED, [CAS/TAS]
CONFIG equivalent of SETUP function.
CONFIG, SPEED, [Pt TEMPERATURE]
CONFIG equivalent of SETUP function.
CONFIG, RATE TIMER
CONFIG equivalent of SETUP function.
CONFIG, RATE
CONFIG equivalent of SETUP function.
CONFIG, LEAK MEASURE, [AUTO LEAK ON/OFF]
CONFIG equivalent of SETUP function, see LEAK MEASURE/CONTROL for details.
CONFIG, LEAK MEASURE, [AUTO LEAK LOCK]
Prevents changes to AUTO LEAK setting in SETUP.
CONFIG, LEAK MEASURE, [AUTO LIMIT ON/OFF]
CONFIG equivalent of SETUP function, see LEAK MEASURE/CONTROL for details.
CONFIG, LEAK MEASURE, [AUTO LIMIT LOCK]
Prevents changes to AUTO LIMIT setting in SETUP.
CONFIG, GROUND
CONFIG equivalent of SETUP function.
6 - 33
K114 Issue No. 9
6