GE Druck ADTS 405 User Manual page 128

6 - 36
Temperature
The ADTS 405 has the following temperature ranges:
Calibrated
Operating
Storage
Measurement and Control Range Specifications
Operating Range and Performance
The ADTS 405 is supplied in one of two full-scale ranges (850 knots or 1000 knots) for
measurement and control of the pitot pressure channel. The following operating
parameters are based on a 1000 knots capability test systems. Variations for 850
knots test systems are shown, where appropriate, in brackets.
For both full-scale ranges, limits are set pre-defined tabular limits known as
STANDARD, CIVIL and *MAX these can be selected through the SETUP menu.
Note:
The ADTS 405 is supplied without *MAX limits, a prompt in the SETUP limits menu
asks for MAX limits to be created. This function automatically loads the maximum
values appropriate for the full-scale range.
Operators may also configure the display to aeronautical or pressure units but should
be aware that when units of pressure are selected, wider full-scale pressure limits will
be enabled for some parameters.
K114 Issue No. 9
............................................................................................... +5° to +35°C (+41° to +95°F)
.......................................................................................... -10° to +50°C (+14° to +122°F)
........................................................................................... -40° to +70°C (-40° to +158°F)
Reference and Specification