GE Druck ADTS 405 User Manual page 24

2 - 2
Procedure
The unit should be at zero/ambient pressure. Disconnect the hose assemblies and
stow in the shoulder bag.
Switch OFF and disconnect from the electrical power supply. Disconnect the
power supply cable and the hand terminal cable. Disconnect the hand terminal
cable from the hand terminal.
Stow the power supply cable, hand terminal cable and the hand terminal in the
ADTS 405F lid. For ADTS 405 rack units these items should be placed in a sealed
polythene bag.
Fit the lid to the unit.
If available, use the original packing material. When using packing materials other
than the original, proceed as follows.
Wrap unit in polyethylene sheeting.
Select a double-wall cardboard container. Inside dimensions must be at least
15 cm greater than the equipment. The carton must meet test strength
requirements of >125 kg.
Protect all sides with shock-absorbing material to prevent equipment movement
within the container.
Seal carton with approved sealing tape.
Mark carton "FRAGILE" on all sides, top, and bottom of shipping container.
Environment
The following conditions apply for both shipping and storage:
Temperature Range -40° to +70°C (-40° to +158°F)
Altitude ......................... Up to 15,000 feet (4,570 metres)
K114 Issue No. 9
Druck ADTS 405 User Manual