GE Druck ADTS 405 User Manual page 73

Druck ADTS 405 User Manual
5 TESTING AND FAULT FINDING
5.1 Introduction
The ADTS 405 contains a built-in, self-test and diagnostic system. The system
continuously monitors the performance of the unit and at power-up carries out a self-
test. Warning and error messages are displayed during normal operation if out of
range values are entered or if faults occur.
This section details the standard serviceability test and the possible error messages
and codes that can be displayed. A fault diagnosis flow chart and table provide the
probable cause and procedures to rectify specific symptoms.
Error messages
When the display shows a message indicating entry of incorrect data or values,
pressing QUIT clears the message and allows the correct entry to be made.
5 - 1
5
K114 Issue No. 9