Displays; Figure 3-4 Single Display - GE Druck ADTS 405 User Manual

Druck ADTS 405 User Manual 3 - 15
3.9 Displays (Fig 3.4, Fig 3.5 and Fig 3.6)
The display normally shows pressures and rates or aeronautical equivalents.
It can be set-up to show, at the same time, one parameter (single), two parameters
(dual) or three parameters (triple). The ADTS 405 automatically returns to the pressure
display if left inactive in any set-up or menu type display for a period of more than one
minute.
The triple display always shows altitude and airspeed; with pressure units selected, the
display always shows Ps and either Qc, Pt or EPR. When ALT or CAS are selected the
display shows the aim and measured values of ALT and CAS as a dual display. With
any other selected parameter the display shows the measured values of altitude and
airspeed and, the aim and measured value of the other selected parameter.
Additional display modes are available for options.
3
F 3-4 S D
IGURE INGLE ISPLAY
K114 Issue No. 9