Instrument Settings; Instrument Information; Lamp Settings - biochrom ultrospec 7000 User Manual

8.8. Instrument Information

Displays the serial number, user-interface (UI) version, build and release dates and
instrument control (IC) version.

8.9. Instrument Settings

Instrument Settings allows the user to:
1. Collect a new, temporary baseline. This will be stored until the instrument is
switched off.
2. Save the temporary baseline. This will become the permanent baseline and be
stored until overwritten.
3. Restore the original baseline. If measurements show the temporary baseline to
be poor quality the permanent baseline can be restored.
Note: Using the Ultrospec 9000 the bandwidth at which the baseline is measured is
selected by pressing the Bandwidth box

8.10. Lamp Settings

Displays the current lamp status and allows the user to reset lamp life (Tungsten
and Deuterium lamps only).
To exit at any time press the exit button located in the bottom right hand corner.
5061-046 Rev1 19