Customer Support Contacts; Service, Repair Or Return; Disposal; Troubleshooting - biochrom ultrospec 7000 User Manual

Note: If you experience any problems with your instrument, please refer to section

"1.4.1. Troubleshooting".

If you require further assistance, please contact customer support :

1.5. Customer Support Contacts

Note: If you experience any problems with your instrument, please refer to section
"1.4.1. Troubleshooting".
If you require further assistance, please contact customer support :

1.6. Service, Repair or Return

visit: www.biochromspectros.com
or email: support@hbiosci.com
Good laboratory practice recommends that the unit be periodically serviced to
or telephone: (US) 1-800-272-2775
ensure the unit is suitable for purpose. It is recommended that the instrument be
1-508-893-8999
serviced annually. You can arrange this through your distributor. Prior to Inspection,
Servicing, Repair or Return of Medical and Laboratory Equipment the unit must be
1.6. Service, Repair or Return
decontaminated.
Good laboratory practice recommends that the unit be periodically serviced to
A returns policy operates on this equipment. Before returning the equipment to the
ensure the unit is suitable for purpose. It is recommended that the instrument be
distributor or manufacturer:
serviced annually. You can arrange this through your distributor. Prior to Inspection,
Servicing, Repair or Return of Medical and Laboratory Equipment the unit must be
decontaminated.
A returns policy operates on this equipment. Before returning the equipment to the
distributor or manufacturer:
Please contact support@hbiosci.com for the correct paperwork and instructions.

1.7. Disposal

Decontamination
In use this product may have been in contact with bio-hazardous materials. Before disposal all accessories should
be removed and thoroughly cleaned in disinfectant and then rinsed with distilled water. All outside surfaces and
1.7. Disposal
sample chamber walls must be wiped down with disinfectant wipes suitable for purpose.
Decontamination
WEEE
In use this product may have been in contact with bio-hazardous materials. Before disposal all accessories should
be removed and thoroughly cleaned in disinfectant and then rinsed with distilled water. All outside surfaces and
A label with a crossed-out wheeled bin symbol indicates that the product is covered by the Waste Electrical and
sample chamber walls must be wiped down with disinfectant wipes suitable for purpose.
Electronic Equipment (WEEE) Directive and is not to be disposed of as unsorted municipal waste. Any products
marked with this symbol must be collected separately and in accordance with local regulatory practice.
WEEE
A label with a crossed-out wheeled bin symbol indicates that the product is covered by the Waste Electrical and
Electronic Equipment (WEEE) Directive and is not to be disposed of as unsorted municipal waste. Any products
marked with this symbol must be collected separately and in accordance with local regulatory practice.
29004782UM AA 10/2011
5061-046 Rev1
29004782UM AA 10/2011
(UK) +44 1223 423723
+44 1223 427888
10
10
10