Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS User Manual page 100

Synchronizing the System Time of the
D
PTP port state
master: Port is in the PTP master mode
slave: Port is in the PTP slave mode.
disabled: PTP function on this port is disabled.
passive: Port is in the PTP passive mode.
listening: Port has no information available and is awaiting
synchronization messages.
D
PTP port burst
disable: During a synchronization interval there is a synchroni-
zation run.
enable: During the synchronization interval, there are 2 to 8 syn-
chronization runs. This permits faster synchronization when the
network load is high.
Fig. 31: PTP Port dialog
98
7.3 Precison Time Protocol
Layer 2 Enhanced with Layer 2 Professional
Release 1.0 10/05