Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS User Manual page 154

Operation Diagnostics
If several devices are connected to a port, for example via a hub, the
table shows one line for each connected device.
If
D
devices with active topology discovery function and
D
devices without active topology discovery function
are connected to a port, the topology table hides the devices without ac-
tive topology discovery.
If
D
only devices without active topology discovery
are connected to a port, the table will contain one line for this port sym-
boli-cally for all devices. The line contains the number of connected de-
vices.
MAC addresses of devices that the topology table hides for the sake of
clarity, are located in the Address Table (FDB, see
address entries" on page
150
104).
Layer 2 Enhanced with Layer 2 Professional
9.7 Topology discovery
"Entering static
Release 1.0 10/05